Inconel 617 Hexagon Bar

Inconel 617 hexagon bar is a nickel alloy bar with a hexagon cross-section. Since it can be used as the raw material for many Inconel 617 fasteners (such as Inconel 617 screws, Inconel 617 nuts, etc.), it is also one of our most popular Inconel 617 bar products. We can provide hot-rolled, cold-drawn or forged Inconel 617 hexagon bars. The common finish of Inconel 617 hexagon bar is polished finish. If you need Inconel 617 hexagon bar with other finishes such as pickling or sandblasting, please confirm with us.

Inconel 617 hexagon bar

• Melting range and some physical constants at room temperature are shown in Table 2. The alloy's low density, compared with tungsten-containing alloys of similar strength, is significant in applications such as aircraft gas turbines where high strength-to-weight ratio is desirable.
• Thermal properties of alloy 617 at temperatures to 2000 degree F (1095 degree ) are given in Table 3. Values for thermal conductivity and specific heat were calculated; other values were measured. Thermal expansion of INCONEL alloy 617 is lower than that of most other austenitic alloys, reducing stresses from differential expansion when the alloy is coupled with carbon steels or low-alloy steels.
• Modulus of elasticity of INCONEL alloy 617 is shown along with Poisson's ratio (calculated from moduli of elasticity) in Table 4. The modulus values were determined by a dynamic method.

Inconel 617 hexagon bar 

The following table shows the physical properties of Inconel 617™.

ڈاؤن لوڈ، اتارنا ٹیگ: inconel 617 hexagon bar, China inconel 617 hexagon bar suppliers